Hydroban 1 Gallon

Description

One Gallon of Hydro Ban is enough to cover 50sf.
PRODUCT DESCRIPTION
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.
HYRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane.
HYDRO BAN bonds directly to a wide variety of substrates.
Uses
§Interior and exterior
§ Swimming pools, fountains and water features
§ Shower pans, stalls and tub surrounds
§ Industrial, commercial and residential bathrooms and laundries
§ Spas and hot tubs
§ Kitchens and food processing areas
§ Terraces and balconies over unoccupied spaces
§ Countertops and facades
§ Steam rooms (when used in conjunction with a vapor barrier)
Advantages
§ Allow for flood testing in 2 hours at 70°F (21°C) or higher¥
§ Does not require the use of fabric^
§ Bonds directly to metal, PVC and ABS plumbing fixtures only
§ Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
§ Changes in color from a light sage to an olive green when cured
§ Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
§ “Extra Heavy Service” rating per TCNA performance levels  (RE: ASTM C627 Robinson Floor Test)
§ Exceeds ANSI A118.10 and A118.12 § IAPMO approved
§ Equipped with anti-microbial technology
§ Rapid drying for a faster time to tile
§ Lighter color for ease of inspection
§ Safe—no solvents and non-flammable
§ Install tile, brick and stone directly onto membrane
^ For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions
¥ Refer to cautions section for more information on curing
Listing and template services provided by inkFrog